SK04-Aux In

You are viewing an old revision of this post, from March 10, 2012 @ 16:15:33. See below for differences between this version and the current revision.

The Aux In module allows additional input signals to be injected into the Synkie. It is built around a MAX7450 signal conditioner IC which clamps black to ground. In addition, it has a low-clip at 0V on the output which cuts off the sync pulses.

Module Info

Inputs: Composite Video 1Vpp
Outputs: Siff
Power Draw on +5V: 63 mA
Power Draw on -5V: 58 mA
Frequency Response:

Schematic & PCB

View on Github

Observations

No observations yet

Revisions:

Changes:

March 10, 2012 @ 16:15:33Current Revision
Content
The Aux In module allows additional input signals to be injected into the Synkie. It is built around a MAX7450 signal conditioner IC which clamps black to ground. In addition, it has a low-clip at 0V on the output which cuts off the sync pulses.  The Aux In module allows additional input signals to be injected into the Synkie. It is built around a MAX7450 signal conditioner IC which clamps black to ground. In addition, it has a low-clip at 0V on the output, which cuts off the sync pulses.

Note: Spaces may be added to comparison text to allow better line wrapping.

Post a comment

You may use the following HTML:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>