Backporch Clamp Notes

You are viewing an old revision of this post, from August 16, 2020 @ 12:20:31. See below for differences between this version and the current revision.

Connecting two different power sources through a DC connection is dangerous, and usually forbidden by safety regulations. Consequently, video-equipment makers have a tacit agreement to AC-couple the input of their equipment, and DC-couple the output—requiring the next stage to re-establish the DC component (see EN 50049-1 for PAL/DVB [SCART] and SMPTE 253M section 9.5 for NTSC, which allow a DC output level). Failure to establish such a protocol leads to “double coupling,” where two coupling capacitors appear in series, or to a short where there are no capacitors. The sole exception to this rule is battery-powered equipment, such as camcorders and still cameras, which AC-couple the output to minimize battery drain.

Module Info

Power Draw on +5V:N/A
Power Draw on -5V:N/A
Frequency Response:

Schematic & PCB

View on Github


No observations yet



There are no differences between the August 16, 2020 @ 12:20:31 revision and the current revision. (Maybe only post meta information was changed.)

Post a comment

You may use the following HTML:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>