SK00-Supply
You are viewing an old revision of this post, from January 10, 2012 @ 15:50:47. See below for differences between this version and the current revision.
The Synkie Power Supply Module
- Provides 1.5 amps of power (both +5V and -5V) to the synkie bus.
- Short circuit and overload protection
Module Info
Inputs: | 240V AC (switchable to 110V) |
---|---|
Outputs: | +5V GND -5V |
Power Draw on +5V: | 2000 mA |
Power Draw on -5V: | N/A |
Frequency Response: | N/A |
Schematic & PCB
View on GithubDownload PCB Layout & Eagle Files
Parts List
Qty | Value | Device | Parts |
1 | 30VA | RT1 | |
2 | 78XXS | 1, 7805 | |
1 | 79XXS | 7905 | |
2 | CPOL-EUE5-10.5 | C12, C13 | |
1 | GBU4 | B1 | |
3 | LED3MM | LED1, LED2, LED3 | |
1 | PINHD-1X4 | JP2 | |
1 | PINHD-2X3 | JP1 | |
3 | R-EU_R1206 | R3, R4, R5 | |
1 | 0 | R-EU_R1206 | R1 |
3 | 1A | SD75 | POLYFUSE1, POLYFUSE2, POLYFUSE3 |
3 | 1N4004 | 1N4004 | D1, D2, D3 |
6 | 100n | C-EUC1206 | C3, C4, C5, C6, C9, C11 |
3 | 2200u | CPOL-EUE5-10.5 | C7, C8, C10 |
2 | 3300u | CPOL-EUE5-10.5 | C1, C2 |
3 | LSP11 | LSP11 | NEUTRE, PHASE, TERRE |
5 | MCS10B | MCS10B | +5V, -5V, GND, LSP2, VCC |
Movie
Observations
After 1 year of using this module, it seems very stable. I’m proud
Revisions:
- January 10, 2012 @ 18:55:25 [Current Revision] by Michael
- January 10, 2012 @ 18:53:35 by Michael
- January 10, 2012 @ 15:54:40 by Michael
- January 10, 2012 @ 15:50:47 by Michael
Changes:
There are no differences between the January 10, 2012 @ 15:50:47 revision and the current revision. (Maybe only post meta information was changed.)