SK50-LFO Triple
You are viewing an old revision of this post, from November 20, 2013 @ 14:06:47. See below for differences between this version and the current revision.
Parts placement
Some nice values for R, C1 and C2:
R | C1 | C2 |
---|---|---|
100 | 1u | 100n |
15k | 22u | 1u |
10k | 220u | 10u |
Module Info
Inputs: | 3 x RESET |
---|---|
Outputs: | 3 x CV |
Power Draw on +5V: | 50 mA |
Power Draw on -5V: | 30 mA |
Frequency Response: |
Schematic & PCB
Photos
Observations
Reset inputs only work with 5v signals from sync bus !!!! we should correct that
CV outputs could be a bit more punchy
Revisions:
- November 20, 2013 @ 23:32:41 [Current Revision] by mexx
- November 20, 2013 @ 14:06:47 by Michael
- November 20, 2013 @ 14:06:11 by Michael
- November 20, 2013 @ 13:51:21 by Michael
- March 10, 2012 @ 17:13:19 by Michael
- March 10, 2012 @ 17:13:08 by mexx
Changes:
There are no differences between the November 20, 2013 @ 14:06:47 revision and the current revision. (Maybe only post meta information was changed.)